Packet Tracer Labs
Go back and
redo an old one.
The CCNA course from Jeremy’s IT Lab covers a lot of ground, and as you work through it, it’s easy to forget the early labs. Set the day you’re on and get a random one from anything you’ve already covered, so you can go back and practice it. REPETITION IS KEY.
Current day
58
Your lab
Picking one…
48 labs in range ·
Every lab
Tap a row to set your day
- 01Packet Tracer Introduction
- 02Connecting Devices
- 03OSI Model
- 04Basic Device Security
- 06Ethernet LAN Switching
- 08IPv4 Addresses
- 09Interface Configuration
- 11Configuring Static Routes
- 11Troubleshooting Static Routes
- 12Life of a Packet
- 15VLSM
- 16VLANs (Part 1)
- 17VLANs (Part 2)
- 18Multilayer Switching
- 19DTP & VTP
- 20Analyzing STP
- 21Configuring Spanning Tree
- 22Rapid STP
- 23EtherChannel
- 24Floating Static Routes
- 25EIGRP Configuration
- 26OSPF (Part 1)
- 27OSPF (Part 2)
- 28OSPF (Part 3)
- 29HSRP Configuration
- 31IPv6 Configuration (Part 1)
- 32IPv6 Configuration (Part 2)
- 33IPv6 Static Routes
- 34Standard ACLs
- 35Extended ACLs
- 36CDP & LLDP
- 37NTP
- 38DNS
- 39DHCP
- 40SNMP
- 41Syslog
- 42SSH
- 43FTP & TFTP
- 44Static NAT
- 45Dynamic NAT
- 46Voice VLANs
- 47QoS
- 49Port Security
- 50DHCP Snooping
- 51Dynamic ARP Inspection
- 52STP & HSRP Synchronization
- 53GRE Tunnels
- 58Wireless LANs
Picking one…